Sauna running costs UK: what a session costs to run
A 6.8 kW heater running continuously at full power for 1.5 hours uses 10.2 kWh. That costs £2.55 if you use 25p per kWh, a round rate chosen for easy sums rather than a quote. Your own tariff, heater-on time and measured consumption determine your sauna running costs.
- Multiply kW × hours × your rate per kWh. Include warm-up in the heater-on period.
- Full-output calculations cover the named heater only. Thermostat cycling can reduce its consumption. Other equipment adds its own.
- Count sessions for a monthly budget and add background heating separately if the winter installation needs it.
How much does a sauna cost to run?
Multiply the heater’s rated power in kW by the hours it is on, then by your electricity tariff in pounds per kWh. That gives a full-output planning figure. Measured kWh multiplied by the tariff gives the actual energy cost for the period measured, including whatever equipment that meter covers.
The two units answer different questions. Kilowatts describe power at a moment. Kilowatt-hours describe energy used over time. A 6 kW heater at full output for one hour uses 6 kWh. Over two hours at the same output it uses 12 kWh.
The Cabin Three electric option offers an optional Harvia Cilindro PC70 rated at 6.8 kW, while the Slim Two electric option has an optional Harvia Vega BC60 rated at 6 kW. Larger rooms such as the Barrel Four electric option can take the 9 kW Harvia PC90 instead. We use these ratings for the examples below. They promise no warm-up time or room temperature. Compare heater options across our electric garden saunas. If you prefer logs, compare our wood-fired garden saunas before working out your fuel budget.
For the PC70, work through the calculation: 6.8 kW × 1.5 hours = 10.2 kWh. Then 10.2 × £0.25 = £2.55. Entering 25 as pounds would make the result one hundred times too large. A calculator labelled p/kWh expects pence. For a calculation in pounds, use £0.25.
Which UK electricity rate should you use?
Use the unit rate on your own electricity account. The examples here use a round 25p per kWh, chosen for easy sums rather than as a quote. Ofgem publishes the current price-cap unit rates by region and payment method, so check those or your bill before relying on any figure.
The Ofgem unit-rate table distinguishes rates by region and payment method, and it changes every quarter. Northern Ireland needs its own supplier rate. Fixed tariffs and time-of-use tariffs can also differ from the cap.
Read the dates on the bill or tariff page. A rate from a previous quarter should not be carried into a new calculation without checking. If your price changes during the month, calculate the energy charged at each rate separately and then add the amounts.
Ofgem’s headline annual cap figure is not a limit on your total bill. The price-cap explanation describes limits on unit rates and standing charges.
More electricity still means a higher bill. Budget for the sauna using the unit rate, rather than a fraction of the headline household figure.
What is the sauna electricity cost per hour?
At the example rate of 25p per kWh, one hour at full output costs £1.50 for a 6 kW heater, £1.70 for a 6.8 kW heater or £2.25 for a 9 kW heater. The table extends that arithmetic to longer heater-on periods. Each period includes warm-up. None predicts how quickly the room heats.
| Rated power | Heater on, including warm-up | Energy at full output | Cost at 25p/kWh |
|---|---|---|---|
| 6 kW | 1 hour | 6 kWh | £1.50 |
| 6 kW | 1.5 hours | 9 kWh | £2.25 |
| 6 kW | 2 hours | 12 kWh | £3.00 |
| 6.8 kW | 1 hour | 6.8 kWh | £1.70 |
| 6.8 kW | 1.5 hours | 10.2 kWh | £2.55 |
| 6.8 kW | 2 hours | 13.6 kWh | £3.40 |
| 9 kW | 1 hour | 9 kWh | £2.25 |
| 9 kW | 1.5 hours | 13.5 kWh | £3.38 |
| 9 kW | 2 hours | 18 kWh | £4.50 |
Start with the on-time you expect to need. Once you have used the sauna, replace that estimate with the period you measured. If the heater remains on between people taking turns, that interval belongs in the calculation as well. Count more than your time on the bench: sitting there covers only part of the electrical use.
How do you use a sauna kWh calculator?
Enter the chosen heater’s rated power, the complete period it will be switched on and your current unit rate. Use the frequency field for a repeating routine, then check how the result defines a month. For a calendar-month budget, multiply by the actual number of sessions you expect that month.
Calculate the heater’s full-output cost
Enter the heater rating, all heater-on time including warm-up, and your own p/kWh tariff. The result covers this heater; add other loads separately.
Rated power × time is a ceiling. Once the room is hot the thermostat switches the elements on and off, so the meter usually shows less. A smart meter reading gives your real figure.
Keep the inputs beside the result when saving a calculation. A cost without its tariff and duration is hard to compare later. If you change both the heater-on time and the tariff, record both changes rather than attributing the saving to the heater alone.
The calculator does not measure thermostat behaviour. Nor does a lower figure prove that a smaller heater suits your room. Choose the heater from its room requirements, then calculate its energy cost. Our heater-sizing guide covers that separate decision.
Why can the meter differ from the calculation?
Rated power multiplied by the whole on-time assumes continuous full output. A thermostat can switch the heating elements off and on, reducing energy use over that period. How much depends on the installation and conditions. Without a measured duty-cycle percentage for your sauna, we do not apply an automatic discount.
Heat demand depends on the starting room temperature. Ventilation and door use affect it too. An empty room kept hot while you wait still uses energy when the thermostat calls for it. Conversely, the heater can pause during part of the period you have recorded as ‘on’.
For a useful record, note the start and end times, set temperature and outdoor conditions along with the energy reading. Compare several sessions under similar conditions before changing the budget. A single mild evening should not become your winter estimate.
A household meter includes other appliances. An oven or vehicle charger operating during the same period makes the household increase an unreliable sauna-only measurement. Ask your electrician about suitable fixed-circuit monitoring if you need separate readings. Do not use a plug-in energy monitor for a high-power fixed heater.
How much electricity does a sauna use per month?
Multiply one session’s energy by the number of sessions in the month. Using the 6.8 kW, 1.5-hour full-output example, eight sessions use 81.6 kWh, which costs £20.40 using 25p per kWh as an example. That covers the stated schedule. Add any other electrical loads.
| Sessions in the month | Heater energy at full output | Cost at 25p/kWh |
|---|---|---|
| 4 | 40.8 kWh | £10.20 |
| 8 | 81.6 kWh | £20.40 |
| 12 | 122.4 kWh | £30.60 |
| 26 | 265.2 kWh | £66.30 |
The example counts eight sessions. It does not assume every month contains exactly four weeks. If you use a weekly average for an annual budget, label that averaging method and allow for holidays or periods when the sauna is unused.
Work from the energy figure rather than from a rounded session cost. Eight sessions of 10.2 kWh total 81.6 kWh. Multiply that by your own rate once to keep the total accurate, however the pence fall. If a hot tub is the other option, our sauna or hot tub comparison puts their running costs side by side.
What if the sauna needs background heating?
Treat background heating as a separate load with its own power use and operating period. Harvia advises against mechanically controlled heaters in outdoor saunas dropping below 0 °C without background heating. That means a heater-only session estimate may leave out electricity needed between sessions, when the room would otherwise sit cold.
Harvia’s cold-weather guidance explains the risk for mechanical controls. Below −5 °C the protective cut-out can trip. To reset it, you need an ambient temperature of at least +18 °C. Have the exact heater and winter arrangement assessed before ordering. These restrictions apply to electric equipment. They do not apply to wood-fired stoves.
For arithmetic only, suppose an assessed background-heating arrangement averaged 0.1 kW continuously for 30 days. Its energy would be 0.1 × 24 × 30 = 72 kWh. At an illustrative 25p per kWh, that costs £18.00. That input simply illustrates the arithmetic. It gives neither a measured demand nor a heating specification, so have the arrangement designed for the cabin before estimating its use.
Ask for the likely operating pattern of the actual arrangement, then measure it if possible. Lighting, separate controls and any other connected equipment also belong outside the main heater line. Avoid calling the table a ceiling for the entire installation.
How can you reduce avoidable electricity use?
Start by counting the time an empty sauna stays hot. Plan the people using it, switch off when heating is no longer needed and follow the specified drying routine afterwards. Check cheaper tariff periods where available, while keeping the heater’s operating instructions and required ventilation intact throughout every session.
Do not block vents to improve a calculation. Nor should you change the heater’s safety settings or stone arrangement to chase a lower bill. Those details belong to the manufacturer’s installation and operating instructions.
If the electricity estimate is uncomfortable, test a less frequent schedule before buying. Four planned sessions cost a different amount from twelve, and that choice is easier to evaluate than an unmeasured efficiency claim. Keep purchase costs in the separate outdoor sauna budget.
Are saunas expensive to run?
For one hour at full output, the sum comes to 6 × £0.25 = £1.50 using the illustrative rate of 25p per kWh. Use your own rate and complete heater-on period for a personal estimate.
For an existing household supply, the charge is normally paid regardless of the sauna. It therefore stays outside this calculation of additional use. If the project changes the supply arrangement or tariff, assess that change separately.
There is no universal result from these numbers. Wood requires the fuel actually used and its purchase price, alongside stove and flue care. Our electric and wood-fired comparison starts with what the property can support.
The example uses a chosen calculation period, including warm-up. Record the time your heater actually remains on. The example promises no warm-up duration or room temperature.
Check the Cabin Three heater option
Use the selected heater rating for running costs, then price the cabin and installation as a separate project.
What we checked for this guide
Every manufacturer figure and rule above links to its source. Checked 10 November 2026; your own equipment manual comes first where it differs.
- 01OfgemUnit-rate table
- 02OfgemPrice-cap explanation
- 03HarviaThe heater does not heat up in cold conditions
Related guides
Written by the Waldenhaus team. We sell outdoor saunas and greenhouses and write these guides from manufacturer manuals, official guidance and our own product pages. Where your equipment manual says something different, follow the manual.


