Barrel sauna kits: what is in the crate, how a barrel goes together and who does what
Barrel sauna kits sold in the UK arrive as a flat pack: numbered wall boards, end-wall panels, shaped cradles, steel straps, shingles and well over a thousand fixings in one timber crate. Building one is carpentry for two people with ordinary tools, in a fixed order the factory draws step by step. Before you order, it helps to know what is in the crate, what you buy yourself, and which jobs belong to an electrician or a stove installer.
- One crate, numbered parts. Our barrels come with 87 numbered wall boards, the end-wall panels, cradles, straps, shingles and bagged fixings.
- You buy five things. A level base, sauna stones, exterior treatment, roof sealant with a can of foam, and your tools.
- The trades come after. An electrician connects the heater; a wood stove and its flue are building work under Part J.
What comes in a barrel sauna kit?
In ours: the wall boards, numbered, the end-wall panels with the door, shaped cradles, floor panels, alder benches and backrests, steel straps with their tensioners, bitumen shingles, the vent and the fixings bagged by size, plus the heater or the stove with its flue kit. The timber arrives untreated.
| The Barrel Three | The Barrel Four | The Barrel Six | |
|---|---|---|---|
| Wall boards | numbered, solid spruce | 87, 2,350 mm long | 87, 3,350 mm long |
| End-wall panels | the door end and the back | 4: two at the door end, two at the back | 6: the front, the partition with the inner door, the back |
| Base cradles | 2 | 3 | 4 |
| Steel straps | 2 | 3 | 4 |
| Bitumen shingles | in the crate | 71 | 120 |
| Fixings | bagged by size | about 1,140 | about 1,911 |
| Assembly manual | ask us before you order | factory manual, 12 drawn steps | factory manual |
| Heater or stove | Harvia PC70 if you add it, or the ETNA 12 with flue kit | the same | the same |
The round walls use solid timber boards, each numbered to match the drawings. The build contains no glued sandwich panels or foam insulation boards.
The crate holds the barrel and the heater, if you add one. For a wood-fired barrel the stove may travel on a pallet of its own. You buy sauna stones separately.
What do you need to buy before you build a barrel sauna?
Five things: a level base the size of the barrel, sauna stones for the heater or stove, an exterior wood treatment, sealant for under the roof with a can of expanding foam for the door frame, and the tools. For an electric barrel, add the electrician’s work as a sixth item.
You will need these ordinary tools from the list on our pages: a cordless driver with T25 and PZ2 bits, a drill with an 8 mm bit, a jigsaw, a hammer, a rubber mallet, a knife, two spanners, a level, a tape measure and a sealant gun. Add a step ladder for the roof. You can buy stones in 20 kg boxes. The Harvia PC70’s basket takes up to 80 kg, and our sauna stones guide explains how to load them.
Finish the base before booking the crate: a level, square, free-draining pad the size of the footprint, in slab, paving or compacted gravel. Our guide to outdoor sauna bases covers each option, and our guide to barrel sauna sizes gives the pad for each barrel. Compare our garden barrel saunas and compact garden saunas to find a footprint that fits before marking out your base.
How does a barrel sauna go together?
From the ground up and round: cradles on the pad, starter boards across them, the end walls, then the side boards up and over the top. Then come the benches, the treatment outside, the steel straps, the vent, the inside of the roof, the door and, last, the shingles. The Barrel Four’s manual draws it in 12 steps.
| Step | What goes in |
|---|---|
| 1. Base cradles | Three shaped cradles on a level pad, 810 mm apart, both diagonals equal |
| 2. Starter boards | The first boards across the cradles, screwed and pre-drilled |
| 3. Lower end walls | The lower panels of both end walls, then the side boards up to them |
| 4. Walls to the top | The upper end-wall panels and the side boards up and over; the last boards trimmed to fit |
| 5. Porch seats | A seat either side of the door, on the porch |
| 6. Benches | Two benches on legs along the side walls, the backrests above them |
| 7. Treat the outside | Exterior treatment on the outside only, from the top down |
| 8. Steel straps | Three straps round the barrel, tightened with two spanners |
| 9. Air vent | The adjustable inlet and the outside grille in the back wall |
| 10. Inside the roof | The ceiling strips, rock wool and sealant under the roof |
| 11. The door | The door frame set in foam, the glass door on its hinges |
| 12. Shingles | Starter battens 1.4 m up each side, then 71 shingles nailed in rows |
In a barrel the shape fixes the order. The ring of boards takes its form from the two end walls and closes over the top, which is why the cradles have to be level and square before the first board goes down. Treat the outside before the straps and shingles cover part of it. The Barrel Six follows the same order, with a partition wall and its inner door added, and four straps.
What do the steel straps do in a barrel sauna kit?
They hold the ring of boards together. Once you have built the walls, run the straps right round the barrel and tighten them on threaded rods with two spanners. After the build they stay adjustable, because solid timber swells in damp weather and shrinks in dry.
The Barrel Three has two straps, The Barrel Four three and The Barrel Six four. Tighten each one evenly, turning the nuts on both sides by the same amount, until it sits snug against the boards. From then on the straps follow the seasons: tighter in a dry summer, eased a little in autumn. Our guide to barrel sauna maintenance sets out the year.
How does the roof go on a barrel?
In two layers. Inside the roof go ceiling strips, rock wool and sealant. Outside, you nail bitumen shingles in rows from a starter batten 1.4 m up each side, as the manual draws them, with the number of nails each shingle takes.
The Barrel Four takes 71 shingles. Buy the sealant for under the roof before the shingle day. On a wood-fired barrel, the flue passes through the roof, and its flashing and rain cap are sealed into the shingles during the build. Look along the rows when you finish, and again each spring: a lifted shingle is where rain gets in.
Can two people build a barrel sauna kit?
Yes, that is what the kit is designed for: our pages describe the build as two people, ordinary tools and a manual that draws every step. We have not timed a barrel build ourselves, so we do not quote a number of hours.
Two people matter because the long, wide parts need support: one person holds the 3.35 m wall boards of The Barrel Six while the other screws them in place. The end-wall panels span nearly the full width of the barrel.
We do not offer assembly, for any sauna, at any price. You, or someone you hire, build it from the manual. A local joiner or garden-building fitter can quote from the same drawings. Our guide to building a garden sauna kit covers how to brief a fitter and what a weekend of sauna carpentry involves.
Which jobs in a barrel sauna kit belong to someone else?
Three. The base comes before the crate. For an electric barrel, a qualified electrician runs a dedicated circuit and connects the heater. For a wood-fired barrel, the stove and flue are building work under Part J in England and Wales, for a HETAS-registered installer or with building control.
The electrician brings a 35 A circuit for the PC70, or 40 A for the PC90, to an isolator at the barrel and connects the heater with the rubber cable Harvia’s manual specifies, type H07RN-F or equivalent. In England a new circuit is notifiable under Approved Document P. Ask for the quote before you order, with the spot for the barrel already chosen.
A wood burning barrel sauna kit, such as the wood-fired Barrel Four, adds the stove and its flue kit. The firebox opening is cut in the back wall during the build, 740 × 440 mm on the Four and Six. Heat shields go inside and out, with rock wool round the firebox. The flue kit comes in the price, and HETAS explains the regulations for fitting a stove and flue. Before choosing wood, check that your address is outside a smoke control area: our stoves are not on Defra’s exempt list. Our barrel sauna heater guide covers both versions, and the wood-fired garden sauna guide covers logs and lighting.
What happens when the barrel kit arrives?
One crate is set down at your kerb, typically 2 to 4 weeks after you order on the UK mainland, on a day the carrier books with you. Check it before the driver leaves, note any damage on the delivery note, then count the parts against the packing list and email us within 14 days.
We replace damaged or missing parts free of charge, delivery included, when you report them with photos and your order number within 14 days of delivery. Before the crate leaves the factory we ask for a photo of it with its packing list. You carry the parts by hand from the kerb to the pad, so walk the route first: a side gate, a corner, a step. Plan for two people and a sack truck. Our delivery and installation guide has an access sheet for the walk.
Is a barrel sauna kit the same as building your own?
It is a self-build with the hard parts made for you: the profiled wall boards, the round end-wall panels and the shaped cradles come cut and numbered, with the heater or stove matched to the barrel. A diy barrel sauna from raw timber means shaping every board and every end wall yourself.
The difference shows in the joints. A barrel’s staves have to meet tight round the whole curve, and its end walls have to match the ring exactly, which is joinery more than carpentry. Our guide to turning a shed into a sauna, or buying a kit compares a self-build from scratch with a kit, line by line.
Ready on the day
Each line is something the carrier will not wait for.
Quick answers about barrel sauna kits
We do not offer assembly for any sauna. You, or a joiner or fitter you hire, build it from the manual. A local joiner can quote for it from the same drawings.
Neither comes with the kit. You buy stones separately in 20 kg boxes, and the exterior treatment comes from any DIY shop: we do not supply it in the UK. Roof sealant and a can of expanding foam are yours to buy too.
Plan for two people with ordinary tools. We do not quote hours because we have not timed a barrel build ourselves. Allow time to finish the base beforehand and for the trades to do their work afterwards.
The Barrel Four and The Barrel Six product pages have the factory manual to download, with every step drawn. For The Barrel Three, ask us what comes with it before you order.
Nearly all of them: they come cut to length and numbered. As the walls close over the top, the manual has the last boards trimmed to fit, which is what the jigsaw on the tool list is for.
You have 14 days from delivery to cancel and a further 14 days to send it back, unused and in its crate. You arrange and pay for the return by pallet freight. Get a collection quote for your address.
Download the manual from The Barrel Four or The Barrel Six product page and read it through before you order, with a pencil: mark the steps where you will need a second pair of hands, and list what you still have to buy.
See The Barrel Four
The product page has the factory manual, the parts in the crate, the 12 steps and the full price. An expert can talk you through the build before you order.
What we checked for this guide
Crate contents, tools, steps and delivery checks come from our barrel product pages and the factory assembly manuals for The Barrel Four and The Barrel Six, November 2026; the electrical and building rules for England come from GOV.UK. Checked 9 November 2026.
Related guides
Written by the Waldenhaus team. We sell outdoor saunas and greenhouses and write these guides from manufacturer manuals, official guidance and our own product pages. Where your equipment manual says something different, follow the manual.

