Sauna electrical requirements UK: what to give your electrician
Send the heater model to your electrician before you book the groundworks. For a UK home, the sauna electrical requirements include the available supply, the route to the cabin and the controls chosen with the heater. A garden socket does not establish that the installation is ready. Take these specifications and questions to a qualified electrician. They will design the installation, connect it and test it.
- Confirm the complete heater model and controller: PC70 and PC70E have different control arrangements.
- Ask for a site assessment before ordering. Heater output alone cannot size the cable or protection.
- Agree the notification and certification route for your UK nation, alongside the electrical design.
Which sauna electrical requirements should UK buyers check?
Give a qualified electrician the sauna drawing, exact heater model, controller details and proposed location. They will survey the home’s supply and the whole route to the cabin, then design the circuit, its protection and a means of isolation. Before work starts, agree how they will test and certify the job and who handles any building-control notification.
Keep the cabin and heater together on the specification sheet, since the cabin name alone does not tell the electrician which heater you have ordered. For example, The Cabin Three electric offers a heater choice within its build. Save your chosen build and ask for the matching manuals. You can compare models in our electric outdoor sauna range before sending the specifications.
Use The Cabin Six electric page in the same way if that is your choice. Tell the electrician about any change to the heater or glazing before they finalise the design. Use choosing a sauna heater to match the output to the room, then plan the electrical work at your property.
Can you plug the heater into an ordinary socket?
The Harvia heaters listed here require a fixed electrical installation by a qualified electrician. Plan their supply from the manufacturer’s instructions. Include the controller you have chosen. Before you commit to a heater choice, ask the electrician to assess the whole installation: an existing garden socket or extension lead does not settle how to connect it.
Harvia’s Cilindro installation manual, section 3.3, assigns electrical connection to an authorised professional electrician. Its diagrams are for the installer. They are not instructions for converting a heater into a plug-in appliance.
When you first contact the electrician, name the cabin and the heater with its controls. Say where you plan to put it and ask for a survey. Include photographs of the route without removing covers from electrical equipment. They can then decide what to inspect in person.
An existing outbuilding supply also needs assessment. Its presence says nothing about the capacity available for the selected heater or whether its route and protection suit this installation. Keep any previous electrical certificates ready for the visit.
How much power do the Harvia options use?
The listed options run from 6 kW to 9 kW. Vega BC60 and BC80 have controls on the heater, as does Cilindro PC90. Cilindro PC70E uses a separate control unit. Record both output and control arrangement when requesting a quote, because similarly named heaters can require different equipment and connections.
| Heater | Rated output | Controls described on our page | Information to send |
|---|---|---|---|
| Harvia Vega BC60 | 6 kW | Built-in timer and thermostat | Exact BC60 manual and cabin layout |
| Harvia Cilindro PC70E | 6.8 kW | Separate Wi-Fi control unit in the offered option | Heater and supplied controller manuals |
| Harvia Vega BC80 | 8 kW | Built-in timer and thermostat | Exact BC80 manual and cabin layout |
| Harvia Cilindro PC90 | 9 kW | Built-in timer and thermostat | PC90 manual and selected cabin layout |
The standard PC70 described on our cabin pages is also 6.8 kW, with its timer and thermostat on the heater. The E suffix matters: order the PC70E and the controls are separate. Confirm the controller’s exact identity with the order so the electrician has its instructions as well as the heater manual.
The PC90 option increases rated output to 9 kW. Ask the electrician about the change before selecting it. Your existing supply may not have room for the higher load shown on the product page.
For operating energy, see sauna running costs. Keep that question separate from circuit design. The thermostat changes how the heater runs during use, but the electrician still has to allow for the full electrical demand.
Does an outdoor sauna need single-phase or three-phase power?
The Harvia manuals show single-phase and three-phase connection arrangements for these heater families. Your electrician must select the arrangement for the exact heater and controller, then assess the supply available at your property. A supported connection option does not establish that a particular home has enough spare capacity to use it.
The Cilindro manual’s figure 7 shows 230 V single-phase and 400 V three-phase arrangements, including the PC70E control-unit arrangement. The Vega manual covers the BC60 and BC80 connections. Ask the electrician to use the correct model row and applicable diagram.
Have the existing service identified during the survey. An internet discussion about another sauna cannot tell you which supply type to choose.
If changes at the supply are needed, ask who will arrange them and what must happen before the heater can be commissioned.
We do not give a universal cable size or fuse rating here. Your electrician sizes it from the heater manual and the site conditions. The design accounts for the length of the cable route and how the cable will be installed. It also covers the controller and other equipment supplied with the sauna.
What should the electrician inspect outside and inside?
Ask for an assessment that starts at the household supply and finishes at the heater, controls and lights. It should address available capacity, the cable route, entry to the cabin, earthing and protection, and accessible isolation. Give the electrician the base and cabin drawings before anyone commits to groundworks or penetrations.
Show where the cabin door will face and how the services would approach it. Draw in the paths and retaining walls, plus any planned landscaping. Ask the electrician to agree their route with whoever prepares the base. Settle what groundworks they need before anyone digs.
Describe other significant electrical equipment at the property, including an electric shower or vehicle charger. The electrician assesses the combined demand. You can help by giving an accurate equipment list, without guessing the rating of the incoming supply.
Inside the sauna, show the installer where the heater will go. They also need the ventilation plan and control-sensor instructions. The ventilation guide explains the questions to resolve with the cabin and heater documentation. Check the lights and their power supplies too: they must suit the places where they will be fitted. A spare domestic fitting may not suit a hot room.
Does an outdoor sauna need an RCD?
Have the electrician design protection for the heater and the other circuits separately, using the current UK requirements and the exact Harvia instructions. RCD means residual current device. Harvia gives a specific warning for its heater feed, so a blanket instruction to put every sauna circuit on the same protection is unsuitable.
Harvia’s RCD guidance and the Cilindro manual distinguish the heater circuit from other sauna circuits. Give that information to the electrician and ask them to resolve the protection design for the full installation under the applicable BS 7671 guidance.
Leave protective devices and existing circuits untouched. If the installation trips, stop using it and have the electrician investigate. Ask for a written design and handover. You need to know how to isolate the sauna and which checks to carry out afterwards.
Who handles notification and certification?
Confirm the country where the sauna will stand and agree the approval route before electrical work begins. England and Wales use their respective Part P guidance. Scotland has its building-standards system, while Northern Ireland’s building regulations are administered by local councils. Ask your electrician and building control what applies to the complete proposal.
| Nation | Official guidance | What to settle before work |
|---|---|---|
| England | Approved Document P | A new circuit is notifiable; agree the competent-person or building-control route |
| Wales | Welsh electrical guidance | Use the Welsh Part P requirements and agree notification or scheme certification |
| Scotland | Domestic technical handbook, April 2026 | Ask the local verifier about the building warrant and electrical certification for the project |
| Northern Ireland | nidirect building-regulations guidance | Ask the district council’s building-control team about approval and evidence for the proposed works |
Ask the quote to identify the testing and documents you will receive. Keep the Electrical Installation Certificate with any building-regulations compliance paperwork. Planning permission for the cabin is a separate question, covered in our sauna planning guide.
What else changes the electrical brief?
Tell the electrician if the cabin will stand unheated in freezing weather, and include any proposed background heating in the design. A wood-fired stove does not need an electric heater circuit, but selected lighting may still need power. Record those choices before assuming that either heating option settles every electrical requirement.
Our cabin pages carry Harvia’s cold-weather qualification: below 0 °C, heaters with mechanical thermostats are not recommended without background heating. The electronic PC70E is less sensitive to cold, but warms a cold room slowly. The control upgrade should not be read as an unrestricted winter-use promise.
On The Barrel Four wood-fired, you can choose interior lighting supplied with a switch and connectors, plus a power supply. It still needs electrical work.
Our electric versus wood-fired guide compares the wider arrangements.
The Harvia models listed here need a fixed installation designed and connected by a qualified electrician. An existing socket does not confirm readiness. Send the exact model and controller details when you arrange the survey.
Ask how the electrician has followed Harvia’s heater instructions. Their design also needs to cover the other sauna circuits and the complete supply route. Keep their protection design with the handover documents. Never alter protection yourself to address tripping.
Use equipment only where its manufacturer permits the temperature and moisture conditions. Give any proposed lights or controls to the electrician for assessment. The presence of a light in a photograph does not make another fitting suitable for the same position.
A wood-fired stove needs no electric heater circuit, but the lighting and any other electrical accessories you choose still need a suitable supply, so check them against the chosen model and your order.
Make the first survey specific
Attach the cabin plan and exact heater and controller manuals.
Choose the cabin and heater together
Save the selected configuration for the electrician before arranging the base.

- Seats
- 3, L-shaped bench
- Outside
- 185 × 220 cm
- Hot room
- 206 × 155 cm
- Bench
- one height

- Seats
- 4, two a side
- Outside
- 240 × 220 cm
- Hot room
- 206 × 175 cm
- Benches
- 174 × 55 cm

- Seats
- 6 on two tiers, plus a side bench
- Rooms
- hot room, changing room and porch
- Outside
- 340 × 220 cm
- Hot room
- 206 × 185 cm
Sizes from the product pages, 11 November 2026. Each page lists the base, delivery and what is in the crate.
Compare the sauna layouts
Send your chosen drawing and heater manual with the site photographs.
What we checked for this guide
Product details follow our product pages checked on 11 November 2026. External guidance is linked beside the relevant advice. The checklists help you prepare your own site and questions. Checked 11 November 2026.
- 01HarviaCilindro installation and user manual
- 02HarviaVega manual
- 03HarviaRCD guidance
- 04Welsh GovernmentBS 7671 guidance
- 05GOV.UKApproved Document P: electrical safety
- 06www.gov.scotDomestic technical handbook, April 2026
- 07GOV.UKNidirect building-regulations guidance
Related guides
Written by the Waldenhaus team. We sell outdoor saunas and greenhouses and write these guides from manufacturer manuals, official guidance and our own product pages. Where your equipment manual says something different, follow the manual.


